| 1 |
Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC |
|---|
| 2 |
BIOS-provided physical RAM map: |
|---|
| 3 |
BIOS-e820: 0000000000000000 - 000000000009f000 (usable) |
|---|
| 4 |
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) |
|---|
| 5 |
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) |
|---|
| 6 |
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) |
|---|
| 7 |
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) |
|---|
| 8 |
BIOS-e820: 000000003fee0000 - 000000003fef5000 (ACPI data) |
|---|
| 9 |
BIOS-e820: 000000003fef5000 - 000000003ff00000 (ACPI NVS) |
|---|
| 10 |
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) |
|---|
| 11 |
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) |
|---|
| 12 |
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) |
|---|
| 13 |
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) |
|---|
| 14 |
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) |
|---|
| 15 |
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) |
|---|
| 16 |
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
|---|
| 17 |
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) |
|---|
| 18 |
126MB HIGHMEM available. |
|---|
| 19 |
896MB LOWMEM available. |
|---|
| 20 |
Entering add_active_range(0, 0, 261856) 0 entries of 256 used |
|---|
| 21 |
Zone PFN ranges: |
|---|
| 22 |
DMA 0 -> 4096 |
|---|
| 23 |
Normal 4096 -> 229376 |
|---|
| 24 |
HighMem 229376 -> 261856 |
|---|
| 25 |
early_node_map[1] active PFN ranges |
|---|
| 26 |
0: 0 -> 261856 |
|---|
| 27 |
On node 0 totalpages: 261856 |
|---|
| 28 |
DMA zone: 32 pages used for memmap |
|---|
| 29 |
DMA zone: 0 pages reserved |
|---|
| 30 |
DMA zone: 4064 pages, LIFO batch:0 |
|---|
| 31 |
Normal zone: 1760 pages used for memmap |
|---|
| 32 |
Normal zone: 223520 pages, LIFO batch:31 |
|---|
| 33 |
HighMem zone: 253 pages used for memmap |
|---|
| 34 |
HighMem zone: 32227 pages, LIFO batch:7 |
|---|
| 35 |
DMI present. |
|---|
| 36 |
Using APIC driver default |
|---|
| 37 |
ACPI: RSDP 000F6A90, 0024 (r2 IBM ) |
|---|
| 38 |
ACPI: XSDT 3FEE6784, 005C (r1 IBM TP-77 1140 LTP 0) |
|---|
| 39 |
ACPI: FACP 3FEE6800, 00F4 (r3 IBM TP-77 1140 IBM 1) |
|---|
| 40 |
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] |
|---|
| 41 |
ACPI: DSDT 3FEE69E7, E376 (r1 IBM TP-77 1140 MSFT 100000E) |
|---|
| 42 |
ACPI: FACS 3FEF6000, 0040 |
|---|
| 43 |
ACPI: SSDT 3FEE69B4, 0033 (r1 IBM TP-77 1140 MSFT 100000E) |
|---|
| 44 |
ACPI: ECDT 3FEF4D5D, 0052 (r1 IBM TP-77 1140 IBM 1) |
|---|
| 45 |
ACPI: TCPA 3FEF4DAF, 0032 (r1 IBM TP-77 1140 PTL 1) |
|---|
| 46 |
ACPI: APIC 3FEF4DE1, 005A (r1 IBM TP-77 1140 IBM 1) |
|---|
| 47 |
ACPI: MCFG 3FEF4E3B, 003E (r1 IBM TP-77 1140 IBM 1) |
|---|
| 48 |
ACPI: BOOT 3FEF4FD8, 0028 (r1 IBM TP-77 1140 LTP 1) |
|---|
| 49 |
ACPI: PM-Timer IO Port: 0x1008 |
|---|
| 50 |
ACPI: Local APIC address 0xfee00000 |
|---|
| 51 |
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) |
|---|
| 52 |
Processor #0 6:13 APIC version 20 |
|---|
| 53 |
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
|---|
| 54 |
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) |
|---|
| 55 |
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 |
|---|
| 56 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
|---|
| 57 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
|---|
| 58 |
ACPI: IRQ0 used by override. |
|---|
| 59 |
ACPI: IRQ2 used by override. |
|---|
| 60 |
ACPI: IRQ9 used by override. |
|---|
| 61 |
Enabling APIC mode: Flat. Using 1 I/O APICs |
|---|
| 62 |
Using ACPI (MADT) for SMP configuration information |
|---|
| 63 |
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) |
|---|
| 64 |
Built 1 zonelists. Total pages: 259811 |
|---|
| 65 |
Kernel command line: root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK1032G_16IX6866T-part2 vga=0x31a resume=/dev/sda3 splash=silent |
|---|
| 66 |
bootsplash: silent mode. |
|---|
| 67 |
mapped APIC to ffffd000 (fee00000) |
|---|
| 68 |
mapped IOAPIC to ffffc000 (fec00000) |
|---|
| 69 |
Enabling fast FPU save and restore... done. |
|---|
| 70 |
Enabling unmasked SIMD FPU exception support... done. |
|---|
| 71 |
Initializing CPU#0 |
|---|
| 72 |
PID hash table entries: 4096 (order: 12, 16384 bytes) |
|---|
| 73 |
Detected 1995.045 MHz processor. |
|---|
| 74 |
Console: colour dummy device 80x25 |
|---|
| 75 |
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
|---|
| 76 |
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
|---|
| 77 |
Memory: 1030228k/1047424k available (1829k kernel code, 16476k reserved, 764k data, 228k init, 129920k highmem) |
|---|
| 78 |
virtual kernel memory layout: |
|---|
| 79 |
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB) |
|---|
| 80 |
pkmap : 0xff800000 - 0xffc00000 (4096 kB) |
|---|
| 81 |
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) |
|---|
| 82 |
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) |
|---|
| 83 |
.init : 0xc0390000 - 0xc03c9000 ( 228 kB) |
|---|
| 84 |
.data : 0xc02c95cb - 0xc0388964 ( 764 kB) |
|---|
| 85 |
.text : 0xc0100000 - 0xc02c95cb (1829 kB) |
|---|
| 86 |
Checking if this processor honours the WP bit even in supervisor mode... Ok. |
|---|
| 87 |
Calibrating delay using timer specific routine.. 3994.16 BogoMIPS (lpj=7988325) |
|---|
| 88 |
Security Framework v1.0.0 initialized |
|---|
| 89 |
Mount-cache hash table entries: 512 |
|---|
| 90 |
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 |
|---|
| 91 |
CPU: L1 I cache: 32K, L1 D cache: 32K |
|---|
| 92 |
CPU: L2 cache: 2048K |
|---|
| 93 |
CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 |
|---|
| 94 |
Intel machine check architecture supported. |
|---|
| 95 |
Intel machine check reporting enabled on CPU#0. |
|---|
| 96 |
Compat vDSO mapped to ffffe000. |
|---|
| 97 |
Checking 'hlt' instruction... OK. |
|---|
| 98 |
SMP alternatives: switching to UP code |
|---|
| 99 |
Freeing SMP alternatives: 12k freed |
|---|
| 100 |
Unpacking initramfs... done |
|---|
| 101 |
Freeing initrd memory: 4075k freed |
|---|
| 102 |
ACPI: Core revision 20070126 |
|---|
| 103 |
Parsing all Control Methods: |
|---|
| 104 |
Table [DSDT](id 0001) - 1550 Objects with 74 Devices 440 Methods 21 Regions |
|---|
| 105 |
Parsing all Control Methods: |
|---|
| 106 |
Table [SSDT](id 0002) - 1 Objects with 0 Devices 1 Methods 0 Regions |
|---|
| 107 |
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired |
|---|
| 108 |
evxfevnt-0091 [00] enable : Transition to ACPI mode successful |
|---|
| 109 |
CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08 |
|---|
| 110 |
Total of 1 processors activated (3994.16 BogoMIPS). |
|---|
| 111 |
ENABLING IO-APIC IRQs |
|---|
| 112 |
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 |
|---|
| 113 |
Brought up 1 CPUs |
|---|
| 114 |
Booting paravirtualized kernel on bare hardware |
|---|
| 115 |
NET: Registered protocol family 16 |
|---|
| 116 |
ACPI: bus type pci registered |
|---|
| 117 |
PCI: Using MMCONFIG |
|---|
| 118 |
Setting up standard PCI resources |
|---|
| 119 |
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 |
|---|
| 120 |
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 1 Runtime GPEs in this block |
|---|
| 121 |
ACPI: EC: EC description table is found, configuring boot EC |
|---|
| 122 |
|
|---|
| 123 |
Completing Region/Field/Buffer/Package initialization:..................................................................................................................................................................................................................................................................................................... |
|---|
| 124 |
Initialized 21/21 Regions 141/141 Fields 83/83 Buffers 48/59 Packages (1560 nodes) |
|---|
| 125 |
Initializing Device/Processor/Thermal objects by executing _INI methods:....... |
|---|
| 126 |
Executed 7 _INI methods requiring 2 _STA executions (examined 78 objects) |
|---|
| 127 |
ACPI: Interpreter enabled |
|---|
| 128 |
ACPI: (supports S0 S3 S4 S5) |
|---|
| 129 |
ACPI: Using IOAPIC for interrupt routing |
|---|
| 130 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
|---|
| 131 |
PCI: Probing PCI hardware (bus 00) |
|---|
| 132 |
Force enabled HPET at base address 0xfed00000 |
|---|
| 133 |
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO |
|---|
| 134 |
PCI quirk: region 1180-11bf claimed by ICH6 GPIO |
|---|
| 135 |
PCI: Transparent bridge - 0000:00:1e.0 |
|---|
| 136 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
|---|
| 137 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] |
|---|
| 138 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] |
|---|
| 139 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] |
|---|
| 140 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] |
|---|
| 141 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] |
|---|
| 142 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] |
|---|
| 143 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) |
|---|
| 144 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) |
|---|
| 145 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) |
|---|
| 146 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) |
|---|
| 147 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) |
|---|
| 148 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) |
|---|
| 149 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) |
|---|
| 150 |
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) |
|---|
| 151 |
ACPI: Power Resource [PUBS] (on) |
|---|
| 152 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
|---|
| 153 |
pnp: PnP ACPI init |
|---|
| 154 |
ACPI: bus type pnp registered |
|---|
| 155 |
pnp: PnP ACPI: found 10 devices |
|---|
| 156 |
ACPI: ACPI bus type pnp unregistered |
|---|
| 157 |
PnPBIOS: Disabled by ACPI PNP |
|---|
| 158 |
PCI: Using ACPI for IRQ routing |
|---|
| 159 |
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report |
|---|
| 160 |
ACPI: RTC can wake from S4 |
|---|
| 161 |
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved |
|---|
| 162 |
pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved |
|---|
| 163 |
pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved |
|---|
| 164 |
Time: tsc clocksource has been installed. |
|---|
| 165 |
pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved |
|---|
| 166 |
pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved |
|---|
| 167 |
pnp: 00:02: iomem range 0xf0008000-0xf000bfff could not be reserved |
|---|
| 168 |
pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved |
|---|
| 169 |
pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved |
|---|
| 170 |
PCI: Bridge: 0000:00:01.0 |
|---|
| 171 |
IO window: 2000-2fff |
|---|
| 172 |
MEM window: b0100000-b01fffff |
|---|
| 173 |
PREFETCH window: c8000000-cfffffff |
|---|
| 174 |
PCI: Bridge: 0000:00:1c.0 |
|---|
| 175 |
IO window: disabled. |
|---|
| 176 |
MEM window: b0200000-b02fffff |
|---|
| 177 |
PREFETCH window: disabled. |
|---|
| 178 |
PCI: Bridge: 0000:00:1c.1 |
|---|
| 179 |
IO window: 3000-4fff |
|---|
| 180 |
MEM window: b2000000-b3ffffff |
|---|
| 181 |
PREFETCH window: d0000000-d00fffff |
|---|
| 182 |
PCI: Bridge: 0000:00:1c.2 |
|---|
| 183 |
IO window: 5000-6fff |
|---|
| 184 |
MEM window: b4000000-b5ffffff |
|---|
| 185 |
PREFETCH window: d0100000-d01fffff |
|---|
| 186 |
PCI: Bridge: 0000:00:1c.3 |
|---|
| 187 |
IO window: 7000-8fff |
|---|
| 188 |
MEM window: b6000000-b7ffffff |
|---|
| 189 |
PREFETCH window: d0200000-d02fffff |
|---|
| 190 |
PCI: Bus 21, cardbus bridge: 0000:14:00.0 |
|---|
| 191 |
IO window: 00009000-000090ff |
|---|
| 192 |
IO window: 00009400-000094ff |
|---|
| 193 |
PREFETCH window: d8000000-dbffffff |
|---|
| 194 |
MEM window: b8000000-bbffffff |
|---|
| 195 |
PCI: Bridge: 0000:00:1e.0 |
|---|
| 196 |
IO window: 9000-cfff |
|---|
| 197 |
MEM window: b8000000-c00fffff |
|---|
| 198 |
PREFETCH window: d8000000-dfffffff |
|---|
| 199 |
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 |
|---|
| 200 |
PCI: Setting latency timer of device 0000:00:01.0 to 64 |
|---|
| 201 |
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 |
|---|
| 202 |
PCI: Setting latency timer of device 0000:00:1c.0 to 64 |
|---|
| 203 |
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18 |
|---|
| 204 |
PCI: Setting latency timer of device 0000:00:1c.1 to 64 |
|---|
| 205 |
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19 |
|---|
| 206 |
PCI: Setting latency timer of device 0000:00:1c.2 to 64 |
|---|
| 207 |
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20 |
|---|
| 208 |
PCI: Setting latency timer of device 0000:00:1c.3 to 64 |
|---|
| 209 |
PCI: Setting latency timer of device 0000:00:1e.0 to 64 |
|---|
| 210 |
ACPI: PCI Interrupt 0000:14:00.0[A] -> GSI 16 (level, low) -> IRQ 16 |
|---|
| 211 |
NET: Registered protocol family 2 |
|---|
| 212 |
IP route cache hash table entries: 32768 (order: 5, 131072 bytes) |
|---|
| 213 |
TCP established hash table entries: 131072 (order: 8, 1572864 bytes) |
|---|
| 214 |
TCP bind hash table entries: 65536 (order: 7, 524288 bytes) |
|---|
| 215 |
TCP: Hash tables configured (established 131072 bind 65536) |
|---|
| 216 |
TCP reno registered |
|---|
| 217 |
Simple Boot Flag at 0x35 set to 0x1 |
|---|
| 218 |
Machine check exception polling timer started. |
|---|
| 219 |
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
|---|
| 220 |
hpet0: 3 64-bit timers, 14318180 Hz |
|---|
| 221 |
audit: initializing netlink socket (disabled) |
|---|
| 222 |
audit(1211217793.328:1): initialized |
|---|
| 223 |
highmem bounce pool size: 64 pages |
|---|
| 224 |
Total HugeTLB memory allocated, 0 |
|---|
| 225 |
VFS: Disk quotas dquot_6.5.1 |
|---|
| 226 |
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
|---|
| 227 |
io scheduler noop registered |
|---|
| 228 |
io scheduler anticipatory registered |
|---|
| 229 |
io scheduler deadline registered |
|---|
| 230 |
io scheduler cfq registered (default) |
|---|
| 231 |
Boot video device is 0000:01:00.0 |
|---|
| 232 |
PCI: Setting latency timer of device 0000:00:01.0 to 64 |
|---|
| 233 |
assign_interrupt_mode Found MSI capability |
|---|
| 234 |
Allocate Port Service[0000:00:01.0:pcie00] |
|---|
| 235 |
Allocate Port Service[0000:00:01.0:pcie03] |
|---|
| 236 |
PCI: Setting latency timer of device 0000:00:1c.0 to 64 |
|---|
| 237 |
assign_interrupt_mode Found MSI capability |
|---|
| 238 |
Allocate Port Service[0000:00:1c.0:pcie00] |
|---|
| 239 |
Allocate Port Service[0000:00:1c.0:pcie02] |
|---|
| 240 |
Allocate Port Service[0000:00:1c.0:pcie03] |
|---|
| 241 |
PCI: Setting latency timer of device 0000:00:1c.1 to 64 |
|---|
| 242 |
assign_interrupt_mode Found MSI capability |
|---|
| 243 |
Allocate Port Service[0000:00:1c.1:pcie00] |
|---|
| 244 |
Allocate Port Service[0000:00:1c.1:pcie02] |
|---|
| 245 |
Allocate Port Service[0000:00:1c.1:pcie03] |
|---|
| 246 |
PCI: Setting latency timer of device 0000:00:1c.2 to 64 |
|---|
| 247 |
assign_interrupt_mode Found MSI capability |
|---|
| 248 |
Allocate Port Service[0000:00:1c.2:pcie00] |
|---|
| 249 |
Allocate Port Service[0000:00:1c.2:pcie02] |
|---|
| 250 |
Allocate Port Service[0000:00:1c.2:pcie03] |
|---|
| 251 |
PCI: Setting latency timer of device 0000:00:1c.3 to 64 |
|---|
| 252 |
assign_interrupt_mode Found MSI capability |
|---|
| 253 |
Allocate Port Service[0000:00:1c.3:pcie00] |
|---|
| 254 |
Allocate Port Service[0000:00:1c.3:pcie02] |
|---|
| 255 |
Allocate Port Service[0000:00:1c.3:pcie03] |
|---|
| 256 |
vesafb: framebuffer at 0xc8000000, mapped to 0xf8880000, using 10240k, total 131008k |
|---|
| 257 |
vesafb: mode is 1280x1024x16, linelength=2560, pages=50 |
|---|
| 258 |
vesafb: protected mode interface info at c000:5841 |
|---|
| 259 |
vesafb: pmi: set display start = c00c58af, set palette = c00c58e9 |
|---|
| 260 |
vesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4 |
|---|
| 261 |
vesafb: scrolling: redraw |
|---|
| 262 |
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 |
|---|
| 263 |
bootsplash 3.1.6-2004/03/31: looking for picture... |
|---|
| 264 |
bootsplash: silentjpeg size 98233 bytes |
|---|
| 265 |
bootsplash: ...found (1280x1024, 35219 bytes, v3). |
|---|
| 266 |
Console: switching to colour frame buffer device 156x60 |
|---|
| 267 |
fb0: VESA VGA frame buffer device |
|---|
| 268 |
isapnp: Scanning for PnP cards... |
|---|
| 269 |
Switched to NOHz mode on CPU #0 |
|---|
| 270 |
isapnp: No Plug & Play device found |
|---|
| 271 |
Real Time Clock Driver v1.12ac |
|---|
| 272 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled |
|---|
| 273 |
floppy0: no floppy controllers found |
|---|
| 274 |
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
|---|
| 275 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
|---|
| 276 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
|---|
| 277 |
mice: PS/2 mouse device common for all mice |
|---|
| 278 |
input: AT Translated Set 2 keyboard as /class/input/input0 |
|---|
| 279 |
input: PC Speaker as /class/input/input1 |
|---|
| 280 |
IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
|---|
| 281 |
input: TPPS/2 IBM TrackPoint as /class/input/input2 |
|---|
| 282 |
NET: Registered protocol family 1 |
|---|
| 283 |
Using IPI No-Shortcut mode |
|---|
| 284 |
Freeing unused kernel memory: 228k freed |
|---|
| 285 |
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) |
|---|
| 286 |
ACPI: Processor [CPU] (supports 8 throttling states) |
|---|
| 287 |
Marking TSC unstable due to: possible TSC halt in C2. |
|---|
| 288 |
Time: hpet clocksource has been installed. |
|---|
| 289 |
ACPI: Thermal Zone [THM0] (53 C) |
|---|
| 290 |
SCSI subsystem initialized |
|---|
| 291 |
libata version 3.00 loaded. |
|---|
| 292 |
ahci 0000:00:1f.2: version 3.0 |
|---|
| 293 |
ahci: probe of 0000:00:1f.2 failed with error -22 |
|---|
| 294 |
ata_piix 0000:00:1f.2: version 2.11 |
|---|
| 295 |
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] |
|---|
| 296 |
PCI: Setting latency timer of device 0000:00:1f.2 to 64 |
|---|
| 297 |
scsi0 : ata_piix |
|---|
| 298 |
scsi1 : ata_piix |
|---|
| 299 |
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14 |
|---|
| 300 |
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15 |
|---|
| 301 |
Clocksource tsc unstable (delta = -265868840 ns) |
|---|
| 302 |
ata1.00: ATA-6: TOSHIBA MK1032GSX, AS023E, max UDMA/100 |
|---|
| 303 |
ata1.00: 195371568 sectors, multi 16: LBA48 |
|---|
| 304 |
ata1.00: configured for UDMA/100 |
|---|
| 305 |
ata2.00: ATAPI: MATSHITADVD-RAM UJ-830Sx, 1.00, max UDMA/33 |
|---|
| 306 |
ata2.00: configured for UDMA/33 |
|---|
| 307 |
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5 |
|---|
| 308 |
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-830Sx 1.00 PQ: 0 ANSI: 5 |
|---|
| 309 |
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found |
|---|
| 310 |
usbcore: registered new interface driver usbfs |
|---|
| 311 |
usbcore: registered new interface driver hub |
|---|
| 312 |
usbcore: registered new device driver usb |
|---|
| 313 |
USB Universal Host Controller Interface driver v3.0 |
|---|
| 314 |
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 |
|---|
| 315 |
PCI: Setting latency timer of device 0000:00:1d.0 to 64 |
|---|
| 316 |
uhci_hcd 0000:00:1d.0: UHCI Host Controller |
|---|
| 317 |
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 |
|---|
| 318 |
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 |
|---|
| 319 |
usb usb1: new device found, idVendor=0000, idProduct=0000 |
|---|
| 320 |
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 |
|---|
| 321 |
usb usb1: Product: UHCI Host Controller |
|---|
| 322 |
usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd |
|---|
| 323 |
usb usb1: SerialNumber: 0000:00:1d.0 |
|---|
| 324 |
usb usb1: configuration #1 chosen from 1 choice |
|---|
| 325 |
hub 1-0:1.0: USB hub found |
|---|
| 326 |
hub 1-0:1.0: 2 ports detected |
|---|
| 327 |
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) |
|---|
| 328 |
sd 0:0:0:0: [sda] Write Protect is off |
|---|
| 329 |
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
|---|
| 330 |
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
|---|
| 331 |
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) |
|---|
| 332 |
sd 0:0:0:0: [sda] Write Protect is off |
|---|
| 333 |
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
|---|
| 334 |
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
|---|
| 335 |
sda:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 |
|---|
| 336 |
PCI: Setting latency timer of device 0000:00:1d.1 to 64 |
|---|
| 337 |
uhci_hcd 0000:00:1d.1: UHCI Host Controller |
|---|
| 338 |
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 |
|---|
| 339 |
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 |
|---|
| 340 |
usb usb2: new device found, idVendor=0000, idProduct=0000 |
|---|
| 341 |
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 |
|---|
| 342 |
usb usb2: Product: UHCI Host Controller |
|---|
| 343 |
usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd |
|---|
| 344 |
usb usb2: SerialNumber: 0000:00:1d.1 |
|---|
| 345 |
usb usb2: configuration #1 chosen from 1 choice |
|---|
| 346 |
hub 2-0:1.0: USB hub found |
|---|
| 347 |
hub 2-0:1.0: 2 ports detected |
|---|
| 348 |
sda1 sda2 sda3 sda4 |
|---|
| 349 |
sd 0:0:0:0: [sda] Attached SCSI disk |
|---|
| 350 |
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 |
|---|
| 351 |
PCI: Setting latency timer of device 0000:00:1d.2 to 64 |
|---|
| 352 |
uhci_hcd 0000:00:1d.2: UHCI Host Controller |
|---|
| 353 |
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 |
|---|
| 354 |
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 |
|---|
| 355 |
usb usb3: new device found, idVendor=0000, idProduct=0000 |
|---|
| 356 |
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 |
|---|
| 357 |
usb usb3: Product: UHCI Host Controller |
|---|
| 358 |
usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd |
|---|
| 359 |
usb usb3: SerialNumber: 0000:00:1d.2 |
|---|
| 360 |
usb usb3: configuration #1 chosen from 1 choice |
|---|
| 361 |
hub 3-0:1.0: USB hub found |
|---|
| 362 |
hub 3-0:1.0: 2 ports detected |
|---|
| 363 |
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 |
|---|
| 364 |
PCI: Setting latency timer of device 0000:00:1d.7 to 64 |
|---|
| 365 |
ehci_hcd 0000:00:1d.7: EHCI Host Controller |
|---|
| 366 |
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 |
|---|
| 367 |
ehci_hcd 0000:00:1d.7: debug port 1 |
|---|
| 368 |
PCI: cache line size of 32 is not supported by device 0000:00:1d.7 |
|---|
| 369 |
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0004000 |
|---|
| 370 |
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 |
|---|
| 371 |
usb usb4: new device found, idVendor=0000, idProduct=0000 |
|---|
| 372 |
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 |
|---|
| 373 |
usb usb4: Product: EHCI Host Controller |
|---|
| 374 |
usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd |
|---|
| 375 |
usb usb4: SerialNumber: 0000:00:1d.7 |
|---|
| 376 |
usb usb4: configuration #1 chosen from 1 choice |
|---|
| 377 |
hub 4-0:1.0: USB hub found |
|---|
| 378 |
hub 4-0:1.0: 8 ports detected |
|---|
| 379 |
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 |
|---|
| 380 |
PCI: Setting latency timer of device 0000:00:1d.3 to 64 |
|---|
| 381 |
uhci_hcd 0000:00:1d.3: UHCI Host Controller |
|---|
| 382 |
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 |
|---|
| 383 |
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 |
|---|
| 384 |
usb usb5: new device found, idVendor=0000, idProduct=0000 |
|---|
| 385 |
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 |
|---|
| 386 |
usb usb5: Product: UHCI Host Controller |
|---|
| 387 |
usb usb5: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd |
|---|
| 388 |
usb usb5: SerialNumber: 0000:00:1d.3 |
|---|
| 389 |
usb usb5: configuration #1 chosen from 1 choice |
|---|
| 390 |
hub 5-0:1.0: USB hub found |
|---|
| 391 |
hub 5-0:1.0: 2 ports detected |
|---|
| 392 |
swsusp: Basic memory bitmaps created |
|---|
| 393 |
swsusp: Basic memory bitmaps freed |
|---|
| 394 |
Attempting manual resume |
|---|
| 395 |
kjournald starting. Commit interval 5 seconds |
|---|
| 396 |
EXT3 FS on sda2, internal journal |
|---|
| 397 |
EXT3-fs: mounted filesystem with ordered data mode. |
|---|
| 398 |
usb 3-1: new full speed USB device using uhci_hcd and address 2 |
|---|
| 399 |
usb 3-1: new device found, idVendor=0a5c, idProduct=2110 |
|---|
| 400 |
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 |
|---|
| 401 |
usb 3-1: Product: BCM2045B |
|---|
| 402 |
usb 3-1: Manufacturer: Broadcom Corp |
|---|
| 403 |
usb 3-1: configuration #1 chosen from 1 choice |
|---|
| 404 |
usb 3-2: new full speed USB device using uhci_hcd and address 3 |
|---|
| 405 |
usb 3-2: new device found, idVendor=0483, idProduct=2016 |
|---|
| 406 |
usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0 |
|---|
| 407 |
usb 3-2: Product: Biometric Coprocessor |
|---|
| 408 |
usb 3-2: Manufacturer: STMicroelectronics |
|---|
| 409 |
usb 3-2: configuration #1 chosen from 1 choice |
|---|
| 410 |
sd 0:0:0:0: Attached scsi generic sg0 type 0 |
|---|
| 411 |
scsi 1:0:0:0: Attached scsi generic sg1 type 5 |
|---|
| 412 |
Bluetooth: Core ver 2.11 |
|---|
| 413 |
NET: Registered protocol family 31 |
|---|
| 414 |
Bluetooth: HCI device and connection manager initialized |
|---|
| 415 |
Bluetooth: HCI socket layer initialized |
|---|
| 416 |
Non-volatile memory driver v1.2 |
|---|
| 417 |
tg3.c:v3.77 (May 31, 2007) |
|---|
| 418 |
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 |
|---|
| 419 |
PCI: Setting latency timer of device 0000:02:00.0 to 64 |
|---|
| 420 |
Linux agpgart interface v0.102 (c) Dave Jones |
|---|
| 421 |
eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:36:12:39:88 |
|---|
| 422 |
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] |
|---|
| 423 |
eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
|---|
| 424 |
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 |
|---|
| 425 |
rtc_cmos: probe of 00:06 failed with error -16 |
|---|
| 426 |
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 20 |
|---|
| 427 |
Yenta: CardBus bridge found at 0000:14:00.0 [1014:056c] |
|---|
| 428 |
iTCO_vendor_support: vendor-support=0 |
|---|
| 429 |
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray |
|---|
| 430 |
Uniform CD-ROM driver Revision: 3.20 |
|---|
| 431 |
sr 1:0:0:0: Attached scsi CD-ROM sr0 |
|---|
| 432 |
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) |
|---|
| 433 |
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) |
|---|
| 434 |
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
|---|
| 435 |
Yenta: ISA IRQ mask 0x04b8, PCI irq 16 |
|---|
| 436 |
Socket status: 30000006 |
|---|
| 437 |
pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff |
|---|
| 438 |
cs: IO port probe 0x9000-0xcfff: clean. |
|---|
| 439 |
pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xc00fffff |
|---|
| 440 |
pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xdfffffff |
|---|
| 441 |
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 |
|---|
| 442 |
hda_intel: probe_mask set to 0x1 for device 1014:05b7 |
|---|
| 443 |
PCI: Setting latency timer of device 0000:00:1b.0 to 64 |
|---|
| 444 |
Bluetooth: HCI USB driver ver 2.9 |
|---|
| 445 |
intel_rng: FWH not detected |
|---|
| 446 |
ACPI: PCI Interrupt 0000:14:00.1[B] -> GSI 17 (level, low) -> IRQ 21 |
|---|
| 447 |
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[c0001000-c00017ff] Max Packet=[2048] IR/IT contexts=[4/4] |
|---|
| 448 |
usbcore: registered new interface driver hci_usb |
|---|
| 449 |
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. |
|---|
| 450 |
[fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes. |
|---|
| 451 |
[fglrx] ASYNCIO init succeed! |
|---|
| 452 |
[fglrx] PAT is enabled successfully! |
|---|
| 453 |
[fglrx] module loaded - fglrx 8.42.3 [Oct 19 2007] on minor 0 |
|---|
| 454 |
NET: Registered protocol family 23 |
|---|
| 455 |
input: Power Button (FF) as /class/input/input3 |
|---|
| 456 |
ACPI: Power Button (FF) [PWRF] |
|---|
| 457 |
input: Lid Switch as /class/input/input4 |
|---|
| 458 |
ACPI: Lid Switch [LID] |
|---|
| 459 |
input: Sleep Button (CM) as /class/input/input5 |
|---|
| 460 |
ACPI: Sleep Button (CM) [SLPB] |
|---|
| 461 |
ACPI: ACPI Dock Station Driver |
|---|
| 462 |
ACPI: AC Adapter [AC] (on-line) |
|---|
| 463 |
ACPI: Battery Slot [BAT0] (battery present) |
|---|
| 464 |
pnp: Device 00:09 activated. |
|---|
| 465 |
nsc-ircc, chip->init |
|---|
| 466 |
nsc-ircc, Found chip at base=0x164e |
|---|
| 467 |
nsc-ircc, driver loaded (Dag Brattli) |
|---|
| 468 |
IrDA: Registered device irda0 |
|---|
| 469 |
nsc-ircc, Found dongle: No dongle connected |
|---|
| 470 |
ieee80211_crypt: registered algorithm 'NULL' |
|---|
| 471 |
sdhci: Secure Digital Host Controller Interface driver |
|---|
| 472 |
sdhci: Copyright(c) Pierre Ossman |
|---|
| 473 |
sdhci: SDHCI controller found at 0000:14:00.2 [1180:0822] (rev 17) |
|---|
| 474 |
ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 22 |
|---|
| 475 |
mmc0: SDHCI at 0xc0001800 irq 22 DMA |
|---|
| 476 |
ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay |
|---|
| 477 |
ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler |
|---|
| 478 |
ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added |
|---|
| 479 |
thinkpad_acpi: ThinkPad ACPI Extras v0.14 |
|---|
| 480 |
thinkpad_acpi: http://ibm-acpi.sf.net/ |
|---|
| 481 |
thinkpad_acpi: ThinkPad BIOS 77ET54WW (1.14 ), EC 77HT54WW-1.14 |
|---|
| 482 |
thinkpad_acpi: IBM ThinkPad Z60m |
|---|
| 483 |
thinkpad_acpi: another device driver is already handling bay events |
|---|
| 484 |
thinkpad_acpi: disabling subdriver bay |
|---|
| 485 |
thinkpad_acpi: CMOS NVRAM (7) and EC (0) do not agree on display brightness level |
|---|
| 486 |
ieee80211: 802.11 data/management/control stack, git-1.1.13 |
|---|
| 487 |
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> |
|---|
| 488 |
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq |
|---|
| 489 |
ipw2200: Copyright(c) 2003-2006 Intel Corporation |
|---|
| 490 |
ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 18 |
|---|
| 491 |
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection |
|---|
| 492 |
cs: IO port probe 0x100-0x3af: clean. |
|---|
| 493 |
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 |
|---|
| 494 |
cs: IO port probe 0x820-0x8ff: clean. |
|---|
| 495 |
cs: IO port probe 0xc00-0xcf7: clean. |
|---|
| 496 |
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b00202194a9] |
|---|
| 497 |
cs: IO port probe 0xa00-0xaff: clean. |
|---|
| 498 |
ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) |
|---|
| 499 |
Bluetooth: L2CAP ver 2.8 |
|---|
| 500 |
Bluetooth: L2CAP socket layer initialized |
|---|
| 501 |
Bluetooth: RFCOMM socket layer initialized |
|---|
| 502 |
Bluetooth: RFCOMM TTY layer initialized |
|---|
| 503 |
Bluetooth: RFCOMM ver 1.8 |
|---|
| 504 |
Adding 2104504k swap on /dev/sda3. Priority:-1 extents:1 across:2104504k |
|---|
| 505 |
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com |
|---|
| 506 |
loop: module loaded |
|---|
| 507 |
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver |
|---|
| 508 |
usbcore: registered new interface driver hiddev |
|---|
| 509 |
usbcore: registered new interface driver usbhid |
|---|
| 510 |
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver |
|---|
| 511 |
kjournald starting. Commit interval 5 seconds |
|---|
| 512 |
EXT3 FS on dm-0, internal journal |
|---|
| 513 |
EXT3-fs: mounted filesystem with ordered data mode. |
|---|
| 514 |
AppArmor: AppArmor initialized |
|---|
| 515 |
audit(1211217817.204:2): type=1505 info="AppArmor initialized" pid=2270 |
|---|
| 516 |
powernow: This module only works with AMD K7 CPUs |
|---|
| 517 |
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 |
|---|
| 518 |
NET: Registered protocol family 10 |
|---|
| 519 |
lo: Disabled Privacy Extensions |
|---|
| 520 |
Mobile IPv6 |
|---|
| 521 |
ip6_tables: (C) 2000-2006 Netfilter Core Team |
|---|
| 522 |
ip_tables: (C) 2000-2006 Netfilter Core Team |
|---|
| 523 |
Netfilter messages via NETLINK v0.30. |
|---|
| 524 |
nf_conntrack version 0.5.0 (8183 buckets, 65464 max) |
|---|
| 525 |
[fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes. |
|---|
| 526 |
[fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000 |
|---|
| 527 |
[fglrx] Reserve Block - 1 offset = 0X7fc0000 length = 0X40000 |
|---|
| 528 |
ADDRCONF(NETDEV_UP): eth0: link is not ready |
|---|
| 529 |
audit(1211217832.705:3): audit_pid=3180 old=0 by auid=4294967295 |
|---|
| 530 |
input: /usr/sbin/acpi-keys as /class/input/input6 |
|---|
| 531 |
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> |
|---|
| 532 |
JBD: barrier-based sync failed on dm-0 - disabling barriers |
|---|
| 533 |
vboxdrv: Trying to deactivate the NMI watchdog permanently... |
|---|
| 534 |
vboxdrv: Successfully done. |
|---|
| 535 |
vboxdrv: Found 1 processor cores. |
|---|
| 536 |
vboxdrv: fAsync=0 u64DiffCores=1. |
|---|
| 537 |
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. |
|---|
| 538 |
vboxdrv: Successfully loaded version 1.6.0 (interface 0x00070001). |
|---|
| 539 |
NET: Registered protocol family 4 |
|---|
| 540 |
NET: Registered protocol family 3 |
|---|
| 541 |
NET: Registered protocol family 5 |
|---|
| 542 |
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready |
|---|
| 543 |
NET: Registered protocol family 17 |
|---|
| 544 |
ieee80211_crypt: registered algorithm 'TKIP' |
|---|
| 545 |
eth1: no IPv6 routers present |
|---|
